Manufacturing Process Selection: How to Choose | Fictiv

Your Material Selection Assistant

Try Materials.AI and get help navigating the complex landscape of plastic and metal parts.

Try Materials.Ai

The Manufacturing Process Selection

The manufacturing process you select impacts part cost, lead time, achievable tolerances, material options, and how easily you can iterate your design. The wrong choice doesn’t just affect the prototype; it can also lock in cost and quality constraints that compound through the entire product development life cycle. Making this decision requires balancing competing technical and economic variables.

This guide evaluates six primary manufacturing process families—CNC machining, injection molding, 3D printing, urethane casting, metal casting (die casting), and sheet metal fabrication—and provides a five-step framework for applying them to your specific part.

The Importance of Manufacturing Process Selection

Manufacturing process selection is choosing the fabrication method that best matches a part’s geometry, material, volume, tolerance, and cost requirements. It is one of the most consequential decisions in product development, ideally executed during the initial design stage.

Most engineered components can use more than one manufacturing process. For example, a bracket could be CNC machined from a solid billet, cast in aluminum, or stamped from sheet metal. The “right” answer is highly dependent on contextual constraints.

Process selection simultaneously dictates DFM constraints, upfront tooling capitalization, unit economics, and total lead time. Selecting a process too late in the development cycle introduces risks, like expensive redesign, suboptimal material properties, or high per-unit costs that erode product margins.

Key Factors in Manufacturing Process Selection

To systematically evaluate manufacturing methods, engineers must analyze six core variables:

Production Volume

Volume Range Production Stage Typical Best-Fit Processes
1–10 parts Prototyping/Proof of Concept 3D Printing, CNC Machining
10–10,000 parts Low-Volume Production CNC Machining, Soft-Tooling Injection Molding, Urethane Casting, Sheet Metal
10,000–50,000 parts Mid-Volume Production Injection Molding, Die Casting, Sheet Metal Fabrication
50,000+ parts High-Volume Production Injection Molding, Die Casting, Progressive Die Sheet Metal Stamping

Part Geometry and Complexity

Each manufacturing process operates within fundamental geometric boundaries imposed by the physics of the fabrication method. They hold different advantages and limitations as follows:

Dimensional Tolerances and Surface Finish

Process Typical Tolerance Range Typical Surface Finish (Ra​)
CNC Machining ±0.025–0.127 mm 0.8–3.2 μm
Injection Molding ±0.05–0.2 mm (part-dependent) 0.8–1.6 μm (as-molded)
3D Printing (SLA) ±0.1–0.3 mm 0.8–3.2 μm
3D Printing (MJF/SLS) ±0.2–0.3 mm 6.3–12.5 μm
Urethane Casting ±0.2–0.4 mm 1.6–3.2 μm
Die Casting ±0.1–0.25 mm 0.8–1.6 μm
Sheet Metal ±0.1–0.25 mm (feature-dependent) Varies by material and finish

Material Requirements

Lead Time

Consider lead time as a primary filter in process selection. Toolable processes—CNC machining, 3D printing, and laser-cut sheet metal—can deliver first parts in 1 to 5 days, while tooling-dependent processes require mold or die fabrication, adding weeks to months.

Cost Structure: Tooling vs. Per-Unit Economics

Manufacturing Process Comparison Table

Factor CNC Machining Injection Molding 3D Printing Urethane Casting Die Casting Sheet Metal
Best Volume Range 1–5,000+ 1,000–Millions 1–500 1–300 10,000+ 50–Millions
Tooling Cost None $5,000–$100,000+ None $500–$2,000 $10,000–$80,000+ $500–$20,000+
Per-Part Cost at Volume Moderate to High Very Low Moderate Moderate Very Low Low
Lead Time (First Part) 1–5 Days 2–12 Weeks 1–3 Days 1–2 Weeks 6–12 Weeks 1–5 Days
Typical Tolerance ±0.025 mm ±0.05–0.2 mm ±0.1–0.3 mm ±0.2–0.4 mm ±0.1–0.25 mm ±0.1–0.25 mm
Material Range Exceptionally Broad Thermoplastics Limited/Growing Polyurethane Resins Al, Zn, Mg Alloys Sheet Metals

Process–by-Process Overview

CNC Machining

CNC machining is a subtractive manufacturing technology where material is removed from a solid billet using automated, high-speed rotating cutting tools.

Injection Molding

Injection molding is a formative production process where molten thermoplastic resins are injected under high pressure into a precision-machined mold cavity.

3D Printing/Additive Manufacturing

3D printing creates three-dimensional parts layer by layer directly from digital CAD models.

Urethane Casting

Urethane casting is a low-pressure molding process using a two-part liquid polyurethane resin poured into a flexible silicone mold.

Metal Casting

Metal casting methods involve mechanically forcing or pouring molten metal into a mold cavity.

Sheet Metal Fabrication

Sheet metal fabrication cuts, punches, stamps, bends, and welds thin, flat metal sheets into structural configurations.

5-Step Framework: How to Select a Manufacturing Process

Step 1: Define Your Production Volume and Timeline

Use the thresholds outlined in this guide to eliminate methods that aren’t ideal for your volume requirements.

Step 2: Identify Your Geometry Constraints

Map the physical shape to the process best aligned with those profiles.

Step 3: Confirm Your Material Requirements

Verify whether your material choice dictates the process.

Step 4: Define Your Tolerance and Surface Finish Requirements

If features require tolerances tighter than ±0.05 mm, CNC machining should be used.

Step 5: Run the Cost Model

Evaluate total program cost using the formula:

C_total = C_unit + (C_tooling / N)
(Where N is the total production run volume)

Manufacturing Process Transitions

As a product matures, the optimal manufacturing process changes. Different triggers mark when it is time to transition from one process to another.