## At a glance

### Processes
- CNC Mill
- CNC Lathe  
### Lead Time
- As fast as 7 days
### Finishing Options
- Vibratory Tumbling, Media Blasting, Powdercoating
### Tolerance
- With drawing: as low as +/- 0.005 mm
- No drawing: ISO 2768 medium

## About the Material

Invar 36 is a nickel-iron alloy with excellent dimensional stability at a wide range of temperatures. The ’36’ stands for the alloy containing 36% nickel and has a super low coefficient of expansion.

### Material Properties

| Property                       | Value                     |
|-------------------------------|---------------------------|
| Yield Strength (tensile)      | 40,000 PSI                |
| Elongation at Break           | 30%                       |
| Hardness                      | Rockwell B90              |
| Density                       | 8.05 g/cm^3               |
|                               | 0.29 lb/in^3              |

## Material Finish

Invar 36 is very similar to most grades of steels/stainless steel in terms of overall appearance. Invar can be media blasted or tumbled to achieve a multitude of surface finishes. Additionally, powder coating can be applied to achieve more matte/glossy colors.

## Design Recommendations

### Min Wall Thickness
- 0.5 mm (0.02 in)

### Min End Mill Size
- 0.8 mm (0.03 in)

### Min Drill Size
- 0.5 mm (0.02 in)

### Max Part Size
- 1200 x 500 x 152 mm [x,y,z] (mill)
- 152 x 394 mm [d,h] (lathe)

### Undercuts
- Square profile, full radius, dovetail profiles

### Radii : Depth
- Depth must not exceed 12x drill bit diameter. For end mills, depth must not exceed 10x tool diameter.

### Cost Saving Tip
To reduce costs, limit the number of part setups, the number of inspection dimensions or tight tolerances, and deep pockets with small radii.
