Kovar CNC Machining | Kovar Material Properties | Fictiv
At a glance
Processes
- CNC Mill
- CNC Lathe
Lead Time
- As fast as 7 days
Finishing Options
- Vibratory Tumbling, Media Blasting, Powdercoating
Tolerance
- With drawing: as low as +/- 0.005 mm
- No drawing: ISO 2768 medium
About the Material
Kovar is a nickel-cobalt alloy best known for its ability to expand at a similar rate to glass when exposed to heat. Additionally, the material has excellent dimensional stability at a wide range of temperatures.
Alignment
Stability
Material Properties
| Property | Value |
|---|---|
| Yield Strength (tensile) | 55,000 PSI |
| Elongation at Break | 30% |
| Hardness | Rockwell B105 |
| Density | 8.36 g/cm^3 |
| 0.3lb / in^3 |
Material Finish
Kovar is very similar to most grades of steels/stainless steel in terms of overall appearance. Kovar can be media blasted or tumbled to achieve a multitude of surface finishes. Additionally, powder coating can be applied to achieve more matte/glossy colors.
Design Recommendations
Min Wall Thickness
- 0.5 mm (0.02 in)
Min End Mill Size
- 0.8 mm (0.03 in)
Min Drill Size
- 0.5 mm (0.02 in)
Max Part Size
- 1200 x 500 x 152 mm [x,y,z] (mill)
- 152 x 394 mm [d,h] (lathe)
Undercuts
- Square profile, full radius, dovetail profiles
Radii : Depth
- Depth must not exceed 12x drill bit diameter. For end mills, depth must not exceed 10x tool diameter.
Cost Saving Tip
To reduce costs, limit the number of part setups, the number of inspection dimensions or tight tolerances, and deep pockets with small radii.