## At a glance

Processes

- CNC Mill
- CNC Lathe

Lead Time

- As fast as 7 days

Finishing Options

- Vibratory Tumbling, Media Blasting, Powdercoating

Tolerance

- With drawing: as low as +/- 0.005 mm
- No drawing: ISO 2768 medium

## About the Material

Kovar is a nickel-cobalt alloy best known for its ability to expand at a similar rate to glass when exposed to heat. Additionally, the material has excellent dimensional stability at a wide range of temperatures.

Alignment

Stability

## Material Properties

| Property                  | Value           |
|--------------------------|-----------------|
| Yield Strength (tensile) | 55,000 PSI      |
| Elongation at Break      | 30%             |
| Hardness                 | Rockwell B105   |
| Density                  | 8.36 g/cm^3     |
|                          | 0.3lb / in^3    |

## Material Finish

Kovar is very similar to most grades of steels/stainless steel in terms of overall appearance. Kovar can be media blasted or tumbled to achieve a multitude of surface finishes. Additionally, powder coating can be applied to achieve more matte/glossy colors.

## Design Recommendations

### Min Wall Thickness

- 0.5 mm (0.02 in)

### Min End Mill Size

- 0.8 mm (0.03 in)

### Min Drill Size

- 0.5 mm (0.02 in)

### Max Part Size

- 1200 x 500 x 152 mm [x,y,z] (mill) 
- 152 x 394 mm [d,h] (lathe)

### Undercuts

- Square profile, full radius, dovetail profiles

### Radii : Depth

- Depth must not exceed 12x drill bit diameter. For end mills, depth must not exceed 10x tool diameter.

### Cost Saving Tip

To reduce costs, limit the number of part setups, the number of inspection dimensions or tight tolerances, and deep pockets with small radii.
