CNC Machining Magnesium | Fictiv
At a glance
Processes
- CNC Mill
- CNC Lathe
Lead Time
- As fast as 10 days
Finishing Options
- Vibratory Tumbling
- Media Blasting
- Powder Coating
Tolerance
- With drawing: as low as +/- 0.005 mm
- No drawing: ISO 2768 medium
About the Material
Magnesium, a common material for die casting, is increasingly popular for CNC machining because it is lightweight and highly machinable in terms of feed rates. Machined magnesium also produces excellent surface finishes due to shorter chips being produced during the machining process. Fictiv offers multiple Magnesium alloys: AZ91D, AZ61B, and AZ31B. Each has slightly different properties, but AZ91D is the most commonly used in die casting and CNC machining.
Lightness
Extreme Toughness
Material Properties
AZ91D Magnesium
- Yield Strength (tensile): 22,000 PSI
- Elongation at Break: 3%
- Hardness: Brinell 63
- Density: 1.81 g/cm^3 (0.07 lb/in^3)
AZ61B Magnesium
- Yield Strength (tensile): 33,000 PSI
- Elongation at Break: 16%
- Hardness: Brinell 60
- Density: 1.8 g/cm^3 (0.07 lb/in^3)
AZ31B Magnesium
- Yield Strength (tensile): 29,000 PSI
- Elongation at Break: 15%
- Hardness: Brinell 49
- Density: 1.77 g/cm^3 (0.06 lb/in^3)
Material Finish
Magnesium is very similar to most grades of aluminum in terms of overall appearance. Magnesium can be media blasted or tumbled to achieve a multitude of surface finishes. Additionally, powder coating can be applied to achieve more matte/glossy colors.
Design Recommendations
Min Wall Thickness
- 0.5 mm (0.02 in)
Min End Mill Size
- 0.8 mm (0.03 in)
Min Drill Size
- 0.5 mm (0.02 in)
Max Part Size
- 1200 x 500 x 152 mm [x,y,z] (mill)
- 152 x 394 mm [d,h] (lathe)
Undercuts
- Square profile, full radius, dovetail profiles
Radii : Depth
- Depth must not exceed 12x drill bit diameter. For end mills, depth must not exceed 10x tool diameter.
Cost Saving Tip
To reduce costs, limit the number of part setups, the number of inspection dimensions or tight tolerances, and deep pockets with small radii.