Opaque Elastomer For Urethane Casting | Fictiv
At a glance
Process
Urethane Casting
Lead Time
10 days
Colors
All colors; precise pantone color matching available
Hardness
Shore A 20, 30, 40, 50, 60, 70, 80, 90
Price
$$
Applications
Wearables, gaskets, overmolds
Material Properties
- Hardness: 20-90 Shore A
- Tensile Strength (Mpa): 45309
- Elongation %: 200-640
- Impact Strength: N/A
Urethane Material Grades
- Overseas: Axson UPX 8400
- Domestic: Crosslink Triathane 3 Part System
About the Material
Opaque Elastomer is a polyurethane plastic that simulates all kinds of rubber-like materials such as TPE, TPU, and silicone rubber. This material is great for wearables, gaskets, and overmolds and is available from Shore 20A to Shore 90A in 10A increments.
Material Properties
- Hardness
Shore A 20, 30, 40, 50, 60, 70, 80, 90 - Elongation at Break
200-490%
Design Recommendations
Min Wall Thickness
- 1.5 mm for guaranteed parts
- 1.0 mm minimum
Rib Dimensions
- Thickness: < 60% nominal wall thickness.
- Height: < 3x thickness
Min Boss Dimensions (height, diameter)
- 1 x 1 mm
- 0.039 x 0.039 in
Cost Saving Tip
To reduce costs, limit the number of part setups, the number of inspection dimensions or tight tolerances, and deep pockets with small radii.