## At a glance

**Processes**  
CNC Mill  
CNC Lathe

**Lead Time**  
As fast as 7 days

**Finishing Options**  
Available as-machined

**Tolerance**  
With drawing: as low as +/- 0.005 mm  
No drawing: ISO 2768 medium

## About the Material

Torlon PAI (Polyamide-imide) 4301 is a wear-resistant grade of PAI that contains amounts of graphite and PTFE. Torlon PAI has a low coefficient of friction, which makes it well-suited to applications related to seals, valve seats, and bearings. In addition, Torlon PAI is a high strength material with great dimensional stability.

**Resilience**

**Fortitude**

## Material Properties

**Torlon PAI (4301)**  
**Yield Strength (tensile)**  
15,000 PSI

**Elongation at Break**  
5%

**Hardness**  
Rockwell M106

**Density**  
1.44 g/cm^3  
0.05lb / in^3

## Material Finish

Depending on the intended part size/geometry, Torlon PAI is available in black, brown, or yellow (and can be machined to a variety of surface finishes).

## Design Recommendations

### Min Wall Thickness  
0.5 mm (0.02 in)

### Min End Mill Size  
0.8 mm (0.03 in)

### Min Drill Size  
0.5 mm (0.02 in)

### Max Part Size  
1200 x 500 x 152 mm [x,y,z] (mill)  
152 x 394 mm [d,h] (lathe)

### Undercuts  
Square profile, full radius, dovetail profiles

### Radii : Depth  
Depth must not exceed 12x drill bit diameter. For end mills, depth must not exceed 10x tool diameter.

### Cost Saving Tip  
To reduce costs, limit the number of part setups, the number of inspection dimensions or tight tolerances, and deep pockets with small radii.
