CNC Machining Zinc | Fictiv
At a glance
Processes
- CNC Mill
- CNC Lathe
Lead Time
As fast as 7 days
Finishing Options
- Vibratory Tumbling
- Media Blasting
- Powder Coating
Tolerance
With drawing: as low as +/- 0.005 mm
No drawing: ISO 2768 medium
About the Material
Zamak 3 is the most widely used grade of Zinc available and provides excellent dimensional stability (along with other physical and mechanical properties).
Heat Resistance
Shielding
Material Properties
Zamak 3 (Zinc)
- Yield Strength (tensile): 30,000 PSI
- Elongation at Break: 10%
- Hardness: Brinell 82
- Density: 6.6 g/cm^3
0.24lb / in^3
Material Finish
Zamak 3 is very similar to most grades of aluminum in terms of overall appearance. Zamak 3 can be media blasted or tumbled to achieve a multitude of surface finishes. Additionally, powder coating can be applied to achieve more matte/glossy colors.
Design Recommendations
Min Wall Thickness
0.5 mm (0.02 in)
Min End Mill Size
0.8 mm (0.03 in)
Min Drill Size
0.5 mm (0.02 in)
Max Part Size
1200 x 500 x 152 mm [x,y,z] (mill)
152 x 394 mm [d,h] (lathe)
Undercuts
Square profile, full radius, dovetail profiles
Radii : Depth
Depth must not exceed 12x drill bit diameter. For end mills, depth must not exceed 10x tool diameter.
Cost Saving Tip
To reduce costs, limit the number of part setups, the number of inspection dimensions or tight tolerances, and deep pockets with small radii.