3D Printing Technologies & Guidelines | Fictiv
3D Printing Specifications & Guidelines
6 addictive technologies with specs, materials, and design tips per process
3D Printing Technology Comparison
| Technology | Layer Height | Min Wall | Tolerance | Best For |
|---|---|---|---|---|
| FDM | 0.1–0.3mm | 0.8mm | ±0.5mm | Prototyping, functional |
| SLA | 0.025–0.1mm | 0.4mm | ±0.15mm | High detail, smooth |
| SLS | 0.1mm | 0.7mm | ±0.3mm | Functional, no supports |
| MJF | 0.08mm | 0.5mm | ±0.3mm | Production volume |
| PolyJet | 0.016mm | 0.5mm | ±0.1mm | Multi-material |
| Carbon DLS | Variable | 0.5mm | ±0.1mm | Production grade |
FDM — Fused Deposition Modeling
- Most common. Thermoplastic filament layer-by-layer.
- Materials: PLA, ABS, PETG, Nylon, TPU, PC, CF Nylon, ULTEM
- Anisotropic — weakest in Z. Overhangs >45° need supports.
- Min feature: 0.4mm (nozzle dependent)
SLA — Stereolithography
- UV laser cures photopolymer. Best surface finish.
- Materials: Standard, Tough, Flexible, Castable, High-Temp, Clear resins
- XY resolution: 0.05–0.15mm. Parts need UV post-cure.
SLS — Selective Laser Sintering
- Laser fuses powder. No supports — powder bed supports part.
- Materials: Nylon PA12, PA11, Glass-Filled, CF Nylon, TPU
- Escape holes (Ø≥5mm) needed for hollow parts.
MJF — Multi Jet Fusion
- HP production-grade. Faster than SLS, isotropic properties.
- Materials: PA12, PA11, PA12 Glass Bead, TPU
- Excellent for medium-volume production runs.
PolyJet & Carbon DLS
- PolyJet: Highest resolution (0.016mm layer). Multi-material/color.
- Carbon DLS: CLIP technology. Injection-mold-quality finish.
- Carbon materials replace IM components in production.
General Design Best Practices for Additive Manufacturing
- Orient to minimize supports
- Consider build orientation for strength
- Add fillets at stress points
- Escape holes for powder processes
- Wall >2mm for structural. Avoid large flats.
- Test fit tolerances with pilot prints